Yates Weed ‘n’ Feed has dual-action technology to both control weeds and give the lawn a feed. It selectively kills broadleaf weeds such as bindii, clover, dandelion and thistles; with added fertiliser that contains the nutrients, nitrogen and iron to feed the lawn and promote lush green growth.

How to Use Yates Weed’n’Feed
1. Measure – measure your lawn area to work out how much to apply. 1L treats 65 m2. 4 L treats 260 m2.
2. Shake & connect – shake the bottle well then attach the hose-on applicator to your hose.
3. Set up – check the applicator on/off switch is in the OFF position.
4. Turn water on – turn on the tap using moderate to high water pressure.
5. Switch on – turn the applicator to the ON position.
6. Start spraying – walk slowly, using a sweeping motion to apply the spray evenly over the measured area. Overlap treated areas slightly to achieve full coverage.
7. Finish – turn the applicator to the OFF position, close the flap, turn off the tap and disconnect the hose.
8. Watering – avoid watering for 12 hours after application.

• Easy to use on/off switch
• Lawn weed killer that selectively kills the most common broadleaf weeds in lawns.
• Ready to use – no mixing required & treats 260m²
• Not suitable for use on Buffalo lawns
• Do not mow or fertilise for 7 days before or after application and avoid watering for 12 hours after application